Menú

Asciugo TD

Thermo-insulating and dehumidifying plaster

Premixed dehumidifying plaster, multifunctional, undecomposable, with good thermo-insulating features, anti-condensation, composed by hydraulic bonding agents, selected mineral inerts, fiberglass and constant granulometry (diameter 2mm curve) expanded polystyrene beads, non-toxic, totally CFC and HCFC free, which eliminates molds and condensation formation, being totally free from nutrition for fungi and bacteria.


Information

Fields of application

The product is used for dehumidification, resonation and thermal insulation of walls affected by rising damp. Effectively breaks down thermal bridges and reduces energy consumption, reducing CO2 emissions. Used as plaster to protect facades from rain.

Can be applied both outdoor and indoor, on surfaces composed by:

  • Mixed stone
  • Tuff
  • Bricks
  • Pre-existent masonries affected by rising damp
Support preparation

Substrate must be perfectly solid, free from duest, dirt, failing parts and efflorescences. Clean the surfaces by sanding or sandblasting, then wash with pressurized water to remove any residue.

As thermo-insulating plaster, on crumbling or excessively absorbent surfaces it is recommended to apply a coat of Isoplast 581.

As de-humidifying plaster, remove existing plaster from treated walls by 1 meter from damp marks. In the presence of salt efflorescences, apply SalMur in advance.

It is recommended to apply a 5mm coat of Asciugo Rinzaffo TD in advance, to even the absorption of the support and enhance adhesion of the plaster.

Prepare the vertical guides with the Asciugo TD plaster.

Mixture Preparation

To apply by hand, mix with a cement mixer or a low-rounds stirrer, adding to the content of a 15 Kg bag 10-12 l of clean water (given the nature of the product, it is recommended to mix the content of the bag in one solution). Stir for 5-10 minutes.

To apply via plastering machine, use a elical mixer with solid screw, stator specific for lightweight mortars, long-pitched screws and 14mm diameter nozzle.

Application

Apply a first coat in 1cm thickness and level with a steel spatula. Wait the coat to grip (not less then 4 hours and not more than 24 hours), then apply a second coat in 2cm thickness and level with a trapezoidal aluminum stadia. To add further thickness, repeat the same procedure (Min 3cm – Max 12cm). Once totally cured, proceed with the application of smoothing products and breathable finishes.

Recommendations

Use clean, non-brackish water. Apply between 5°C and 35°C. Do not apply in high sun exposure and on rainy/windy days. Protect from rain, wind, sun and rapid desiccation for 24-48 hours after application. In case of application during summer, ensure a constant desiccation by using Sunshieldings/Windbreakers. Do not add materials, cement or other bonding agents in the bag. It is recommended to mix the entire content of the bag in one solution. It is recommended to wet the substrates the day before application.

 

Compliance

rt

Technical Data

Application

flat trowel - plastering machine

Packs

kg 15

Colour

white

Mixing water

approx. 10-12 l per bag

Maximum diameter of aggregate

0,1 mm (excluding polystyrene beads) -EN 1015-1

Consumption

3 kg/sqm per cm of thickness

applicable thickness

3 - 12 cm

Application temperature

from +5°C to +35°C

Workability time

approx. 60 min

Adhesion-FP

> 0.10 N/mm² - B - EN 1015-12

Water absorption

≥ 0.3 Kg/m² after 24 hr - EN 1015-18

Coefficient of permeability to water vapour µ

9 - EN 1015-19

Thermal conductivity

0.053 W/m K (certificated by Istituto Masini)

air content

approx. 23% - EN 1015-7

density of hardened mortar

0.29 kg/dm³ - EN 1015-10

density of fresh mortar

0.38 kg/dm³ - EN 1015-6

Compressive strength

class CS I - EN 1015-11

Reaction to fire

Euroclass A1 - EN 13501-1

Durability

NPD

Waiting time before further layers

after 4 hr and before 24 hr

Storage

six months in dry place

Tools cleaning

water soon after use

Pallet

60 bags of kg 15

Data contained in technical data sheets refer to laboratory tests. Indications and methods may be subject to change over time, depending on any technological and productive improvements. Products application takes place out of our control, as we cannot directly intervene on the conditions of the construction sites and on the execution of the works. All indications are general and do not bind our company in any way and therefore the responsibility falls exclusively on customer. We recommend a preventive test of the product in order to verify the suitability in relation to its particular use. Technical service is available to provide additional information.

Do you want to know how many Asciugo TD packs you need?

Calculate it now

surface to be covered in square meters