C1 tiles adhesive
C1 class cement adhesive, EN 12004 certified, easy to apply and with good open time, composed by selected granulometry sands and chemical addictives to obtain a glue with good support adhesion.
For floor and wall application of:
- Ceramic tiles (gres, klinker, single-firing, etc.)
On cement supports such as:
- Traditional cured and leveled plasters
- Cement screed (properly cured and dry)
Surface must be plain, stable, solid, free from dust and dirt. Supports must be cured and dry, not subject to shrinking after the application of tiles. Recover excessive gaps with a smoother (RasaPro) or self-levelling plasters (Level floor). In the presence of rising damp treat in advance with proper primers (Primer Bv 2K).
On excessively hot surfaces due to sun exposure, it is recommended to wet the surfaces with water, avoiding superficial stagnations.
Pour in a container about ¾ of the necessary water to mix a bag of Adesivix, add gradually the powder and mix with a low-rounds stirrer. Proceed by adding the remaining water until an even, clump-free mixture is achieved. Let rest for 5-10 minutes and mix briefly before usage.
Apply a thin glue coating with the smooth side of the spatula, pushing vigorously against the support and immediately apply the mixture with a saw-tooth spatula (using the correct size, depending from the size of the tile). During application make sure the adhesive did not form a superficial film. Do not wet the glue after application, as the water may form an anti-adhesive film. Accurately beat the tiles to allow perfect adhesion.
It is recommended to mix with clean, non-brackish water. Do not add bonding agents, inerts or other materials. In the presence of high temperatures or dusty supports wet the surface in advance with water. Sun and wind exposure may cause the rapid formation of a superficial film. Described times shortens in hot environments and prolongs in cold environments. Apply between +5°C and +35°C. Do not apply on concrete surfaces subject to noticeable shrinking or shocks. Do not apply on heating floors or metallic surfaces.
Posa in interno ed esterno, su pavimenti o pareti di piastrelle di mosaici di ogni tipo, su supporti cementizi quali intonaci tradizionali e massetti cementizi con adesivo cementizio di classe C1 classificato secondo la norma EN 12004.
white - greyAppearance
approx. 7 l per bagConsumption
mosaics and small sizes tiles: 2-2.5 kg/sqm; normal sizes tiles: 3-5 kg/sqmGrain size
≤ 0,6 mmAdhesion
(after 28 d) > 0.5 N/mm² - EN 1348Bulk density
1.4 kg/dm³Application temperature
from +5°C to +35°Cpot life
approx. 8 hrMix standing times
approx. 5-10 minOpen time
>15 minAdjustability time
approx. 30-40 minReady for use
after 14 daysSet to light foot traffic
24 hrWaiting time before grouting
wall joints after 12 hr - floor joints after 24 hrReaction to fire
EuroClass A1 - UNI EN 13501-1Tools cleaning
water soon after usePallet
60 bags of kg 25
Data contained in technical data sheets refer to laboratory tests. Indications and methods may be subject to change over time, depending on any technological and productive improvements. Products application takes place out of our control, as we cannot directly intervene on the conditions of the construction sites and on the execution of the works. All indications are general and do not bind our company in any way and therefore the responsibility falls exclusively on customer. We recommend a preventive test of the product in order to verify the suitability in relation to its particular use. Technical service is available to provide additional information.
Do you want to know how many Adesivix packs you need?
Calculate it now