Menú

Altavilla

Pigmented breathable protective

Anti-algae paint based on particular acrylic polymers in water dispersion, mineral micronized charges that improve adhesion, workability and weather agents resistance. Suitable to protect and even the look of treated surfaces. Resistant to alkaline, acid rain and aging, does not form a continuous film and avoid dirt absorption.


Information

Fields of application

Used to remove any possible streak and stain from support such as:

  • Fine plasters
  • Breathable finish plasters
  • Livigni type Plasters
  • Carved stones
  • Exposed concrete
  • Old plasters and thickness coatings

The subtlety of its components allows the paint to penetrate deeply within the support, obtaining highly breathable finishes.

Support preparation

On good shape surfaces: Just remove any dust or dirt.

On bad shape surfaces: Sand and brush carefully, dust out, rebuild any missing part with proper products if necessary and let dry. In case of crumbling surfaces or old paint remove any peeling element and apply a coat of fixative product (Isoplast Acrilico) and let dry.

Application

Apply the product preferably with a smooth roller and, depending by the underneath coloring, apply one or more coats, waiting 6 hours between coats. It is recommended, especially for the first coat, to apply a good mechanical action on the support in order to obtain a good impregnation. On plastic coats apply one coat.

Recommendations

Make sure the supports are perfectly cured. Do not add any other material. Do not work on risk of rain or windy days. Do not apply on hot surfaces, under direct sunlight. Use proper protection (sunshields, windbreakers). Do not apply below 5°C or above 30°C. Protect from rain for at least 48 hours. Stir frequently during application.

Technical Data

Application

roller

Packs

l 5 - l 14

Colour

tinted by means of the Tintometric System Color Meter Pro

Gloss

matt

Dilution

ready to use

Drying

dryed 6 hr - hardened 18-24 hr

Density

1.2 kg/l - EN ISO 2811-1

Theoretical Yield

approx. 5-7 sqm/l for coat

Recoat time

6 hr

VOC

< 40 g/l (2010) - Cat. c: coatings for exterior walls of mineral substrate - water-base (Dir. 2004/42/CE)

Pallet

33 drums of L 14

Data contained in technical data sheets refer to laboratory tests. Indications and methods may be subject to change over time, depending on any technological and productive improvements. Products application takes place out of our control, as we cannot directly intervene on the conditions of the construction sites and on the execution of the works. All indications are general and do not bind our company in any way and therefore the responsibility falls exclusively on customer. We recommend a preventive test of the product in order to verify the suitability in relation to its particular use. Technical service is available to provide additional information.

Do you want to know how many Altavilla packs you need?

Calculate it now

surface to be covered in square meters