Chiragum Trasparente
Non-walkable elastomeric one-component membrane
Transparent waterproofing liquid membrane, composed by a resin mix and proper addictives in order to give the product excellent waterproofing features and high elasticity.
Information
Engineered to avoid water infiltrations and protect surfaces, leaving the support visible or pre-existent flooring.
Applicable on rooftops, terraces and balconies.
Substrate must be perfectly dry and cured. Surfaces must be perfectly clean , dry, free from dust and incoherent parts; the support must be structurally stable, free from efflorescences and rising damp. Remove any failing, detaching part. In the presence of oily substances, remove them meticulously. In the presence of microflora is necessary to remove it by mechanical action. It is recommended to brush vigorously and dust out the support in order to obtain a good adhesion.
The product is ready to use, apply with brush or roller waiting 8 hours between coatings. It is recommended to apply on days free from rain for at least 48 hours.
Make sure the supports are perfectly dry and clean. Wait the first coating to be perfectly dry before proceeding to next coatings. Do not apply in risk of rain for at least 48 hours. In case of very hot days, a natural slight stickiness of the coating may occur. Do not apply below 10°C or above 35°C. It is recommended to protect the coatings until completely dry.
Technical Data
brush - roller
Packsl 1 - l 4 - l 13
Colourtrasparente
Consistencythixotropic paste
Yieldapprox. 2 sqm/l per 2 coats
Dilutionready to use
Application temperaturefrom +10°C to +35°C
Abrasion resistancedryed 18-24 hr - hardened 2 days (T=25°C e U.R.:65%)
Density1.1 ±0.1 kg/dm³
Resistanceexcellent to water, atmospheric agents and temperature changes
Waiting time before further layersafter 24 hr
Tools cleaningwater soon after use
VOC< 140 g/l (2010) - Cat. i: Cat. i: One-pack performance coatings - water-base (Dir. 2004/42/CE)
Pallet33 drum of L 13
Data contained in technical data sheets refer to laboratory tests. Indications and methods may be subject to change over time, depending on any technological and productive improvements. Products application takes place out of our control, as we cannot directly intervene on the conditions of the construction sites and on the execution of the works. All indications are general and do not bind our company in any way and therefore the responsibility falls exclusively on customer. We recommend a preventive test of the product in order to verify the suitability in relation to its particular use. Technical service is available to provide additional information.
Do you want to know how many Chiragum Trasparente packs you need?
Calculate it now