Decorativo in pasta

Mural coating with rustic effect grain size 1,0mm

Mural coating composed by resins in water dispersion, selected natural inerts, light stable pigments and addictives that strengthen adhesion and workability. The product features high transpirabilty, protection from weather/pollution and evens out any imperfection.


Fields of application

Used for decoration and protection, both indoor and outdoor, on:

  • Lime mortar plasters
  • Pre-existent plastic or mineral plasters
  • Hydraulic lime plasters or lime/cement
Support preparation

On already treated or partially degraded supports, remove non adherent parts, dirt, salt efflorescences and previous detaching paint; recover failing parts with proper products from RiparaThor product line, level irregularities and even the support’s absorption with proper smoothing products (see RasaPro, RasaPro flex).

On new surfaces, make sure the supports are completely cured and remove any dust. In case of new cement remove any releasing agent residue.

On pre-existent coatings, make sure the support is clean, dry free from failing parts, molds or oily substances.


The product is ready to use, just stir before application. Apply with a steel spatula in two coatings, waiting 8 hours between coatings. Perform circular gestures during second coating with a plastic spatula, while still wet.


Make sure the supports are perfectly dry and cured. Do not work on risk of rain or windy days. Use proper protection (Sunshields/Windbreakers) Do not apply on hot surfaces, under direct sunlight. Do not apply below 10°C or above 35°C and humidity >75%. Protect from rain for at least 48 hours. To avoid color differences, large surfaces must be worked with product from the same batch. Avoid the application of the material on the same surface on different times and weather conditions, because this could cause color variations.


Technical Data


steel trowel - plastic trowel


kg 25


colours chart - tinted by means of the Tintometric System Color Meter Pro

Theoretical Consumption

4.5-5 kg/sqm for two coats


ready to use

Grain size

1.0 mm

Application temperature

from +10°C to +35°C

Water vapor transmission rate

78,6 mg/cm²*h - class II - EN ISO 7783-2

Air thickness sd

0,29 m

Waiting time before further layers

after 8 hr

Tools cleaning

water soon after use


< 40 g/l (2010) - Cat. c: coatings for exterior walls of mineral substrate - water-base (Dir. 2004/42/CE)


33 drums of kg 25

Data contained in technical data sheets refer to laboratory tests. Indications and methods may be subject to change over time, depending on any technological and productive improvements. Products application takes place out of our control, as we cannot directly intervene on the conditions of the construction sites and on the execution of the works. All indications are general and do not bind our company in any way and therefore the responsibility falls exclusively on customer. We recommend a preventive test of the product in order to verify the suitability in relation to its particular use. Technical service is available to provide additional information.

Do you want to know how many Decorativo in pasta packs you need?

Calculate it now

surface to be covered in square meters

Secured By miniOrange